A novel algorithm for maximum power point tracking using computer vision (CVMPPT).

The behavior of an illuminated solar module can be characterized by its power-voltage curve. Tracking the peak of this curve is essential to harvest the maximum power by the module. The position of the peak varies with temperature and irradiance and needs to be traced. Under partial shading conditions, the number of peaks increases and makes it more difficult to find the global maximum power point (MPP). Various methods are used for maximum power point tracking (MPPT) that are based on iterations. These methods are time-consuming and fail to work satisfactorily under rapidly changing environmental conditions. In this paper, a novel algorithm is proposed that for the first time, utilizes computer vision to find the global maximum power point. This algorithm, which is implemented in Matlab/Simulink, is free of voltage iterations and gives the real-time data for the maximum power point. The proposed algorithm increases the speed and the reliability of the MPP tracking via replacing analogue electronics calculations by digital means. The validity of the algorithm is experimentally verified.

HVHC-ESD-Induced Oxygen Vacancies: An Insight into the Phenomena of Interfacial Interactions of Nanostructure Oxygen Vacancy Sites with Oxygen Ion-Containing Organic Compounds.

The challenging environmental chemical and microbial pollution has always caused issues for human life. This article investigates the detailed mechanism of photodegradation and antimicrobial activity of oxide semiconductors and realizes the interface phenomena of nanostructures with toxins and bacteria. We demonstrate how oxygen vacancies in nanostructures affect photodegradation and antimicrobial behavior. Additionally, a novel method with a simple, tunable, and cost-effective synthesis of nanostructures for such applications is introduced to resolve environmental issues. The high-voltage, high-current electrical switching discharge (HVHC-ESD) system is a novel method that allows on-the-spot sub-second synthesis of nanostructures on top and in the water for wastewater decontamination. Experiments are done on rhodamine B as a common dye in wastewater to understand its photocatalytic degradation mechanism. Moreover, the antimicrobial mechanism of oxide semiconductors synthesized by the HVHC-ESD method with oxygen vacancies is realized on methicillin- and vancomycin-resistant Staphylococcus aureus strains. The results yield new insights into how oxygen ions in dyes and bacterial walls interact with the surface of ZnO with high oxygen vacancy, which results in breaking of the chemical structure of dyes and bacterial walls. This interaction leads to degradation of organic dyes and bacterial inactivation.

Investigating various metal contacts for p-type delafossite α-CuGaO2 to fabricate ultraviolet photodetector.

Delafossite semiconductors have attracted substantial attention in the field of electro-optics owing to their unique properties and availability of p-type materials that are applicable for solar cells, photocatalysts, photodetectors (PDs) and p-type transparent conductive oxides (TCOs). The CuGaO2 (CGO), as one of the most promising p-type delafossite materials, has appealing electrical and optical properties. In this work, we are able to synthesize CGO with different phases by adopting solid-state reaction route using sputtering followed by heat treatment at different temperatures. By examining the structural properties of CGO thin films, we found that the pure delafossite phase appears at the annealing temperature of 900 °C. While at lower temperatures, delafossite phase can be observed, but along with spinel phase. Furthermore, their structural and physical characterizations indicate an improvement of material-quality at temperatures higher than 600 °C. Thereafter, we fabricated a CGO-based ultraviolet-PD (UV-PD) with a metal-semiconductor-metal (MSM) configuration which exhibits a remarkable performance compared to the other CGO-based UV-PDs and have also investigated the effect of metal contacts on the device performance. We demonstrate that UV-PD with the employment of Cu as the electrical contact shows a Schottky behavior with a responsivity of 29 mA/W with a short response time of 1.8 and 5.9 s for rise and decay times, respectively. In contrast, the UV-PD with Ag electrode has shown an improved responsivity of about 85 mA/W with a slower rise/decay time of 12.2/12.8 s. Our work sheds light on the development of p-type delafossite semiconductor for possible optoelectronics application of the future.

An all-sputtered photovoltaic ultraviolet photodetector based on co-doped CuCrO2 and Al-doped ZnO heterojunction.

We propose and fabricate a heterojunction between Al-doped ZnO and (Mg, N)-doped CuCrO2 thin films using the sputtering deposition method. These materials possess wide bandgap that makes them transparent in the visible light but excellent UV-absorbers. On the other hand, the high conductivity of these materials, respectively as n-type and p-type transparent conducting oxides, facilitates the charge transport. We show that the p-n junction fabricated from these materials has the potential to act as a high-performance UV photovoltaic photodetector. The proposed structure, demonstrates fast responses in order of sub seconds, photosensitivity of ~ 41,000, responsivity of 1.645 mA/W, and a detectivity of 3.52 × 1012 Jones that are significantly improved in comparison with the Al-doped ZnO photoconductor. This excellent improvement is attributed to the capability of the photovoltaic configuration that creates a built-in voltage and facilitates the charge separation and collection rather than recombination in the photoconductor configuration.

High-Voltage, High-Current Electrical Switching Discharge Synthesis of ZnO Nanorods: A New Method toward Rapid and Highly Tunable Synthesis of Oxide Semiconductors in Open Air and Water for Optoelectronic Applications.

A novel method of oxide semiconductor nanoparticle synthesis is proposed based on high-voltage, high-current electrical switching discharge (HVHC-ESD). Through a subsecond discharge in the HVHC-ESD method, we successfully synthesized zinc oxide (ZnO) nanorods. Crystallography and optical and electrical analyses approve the high crystal-quality and outstanding optoelectronic characteristics of our synthesized ZnO. The HVHC-ESD method enables the synthesis of ZnO nanorods with ultraviolet (UV) and visible emissions. To demonstrate the effectiveness of our prepared materials, we also fabricated two UV photodetectors based on the ZnO nanorods synthesized using the subsecond HVHC-ESD method. The UV-photodetector test under dark and UV light irradiation also had a promising result with a linear ohmic current-voltage output. In addition to the HVHC-ESD method's excellent tunability for ZnO properties, this method enables the rapid synthesis of ZnO nanorods in open air and water. The results demonstrate the preparation, highlight the synthesis of fine hexagonal-shaped nanorods under a second with controlled oxygen vacancies, and point defects for a wide range of applications in less than a second.

The effect of electric field geometry on the performance of electromembrane extraction systems: footprints of a third driving force along with migration and diffusion.

The distribution of electric field vectors was first calculated for electromembrane extraction (EME) systems in classical and cylindrical electrode geometries. The results showed that supported liquid membrane (SLM) has a general field amplifying effect due to its lower dielectric constant in comparison with aqueous donor/acceptor solutions. The calculated norms of the electric field vector showed that a DC voltage of 50 V can create huge electric field strengths up to 64 kV m(-1) and 111 kV m(-1) in classical and cylindrical geometries respectively. In both cases, the electric field strength reached its peak value on the inner wall of the SLM. In the case of classical geometry, the field strength was a function of the polar position of the SLM whereas the field strength in cylindrical geometry was angularly uniform. In order to investigate the effect of the electrode geometry on the performance of real EME systems, the analysis was carried out in three different geometries including classical, helical and cylindrical arrangements using naproxen and sodium diclofenac as the model analytes. Despite higher field strength and extended cross sectional area, the helical and cylindrical geometries gave lower recoveries with respect to the classical EME. The observed decline of the signal was proved to be against the relations governing migration and diffusion processes, which means that a third driving force is involved in EME. The third driving force is the interaction between the radially inhomogeneous electric field and the analyte in its neutral form.